Skip to content Skip to sidebar Skip to footer

The Only Dedicated 3D Ceramic Printer Using REAL CLAY!

Our line of 3D Clay printers have some unique features when compared to other 3D printers. We use a cardinal axis system, rather than a delta printer configuration. This allows for precise control with minimal effort. Most clay printers use a pressurized system using compressed air, with a 3D Potterbot a high-pressure system is not needed.

Welcome to 3D U Print, your one-stop shop for all your 3D Pottery & Concrete printers, workshops, tech support, innovations, and more.Shellspen has always been an innovator of modern formulas and technology for sculpture & industrial metal castings, creating Shellspen formulas for ceramic shell casting in the mid-1960s
, selling suspended ceramic shell slurries since 1979. As modern technology changes, we are proud to be a part of this new era of 3D Pottery, Concrete, Soil, Organic,
(almost any slurry formula can be printed and more) printed with our line of 3d Printers.

We are here to work with you whether in your school, classroom, workshop, studio, or home to change the world with 3D printing via pottery, concrete, and more.

* Sign up for our Pottery 3D Printing workshops and 3d Pottery & Concrete Newsletters, learn all the steps from designing your simple piece on the computer, and
printing in pottery: EMAIL FORM

Our line of 3D Printers is proudly made in the USA

3D Potterbot Scara v4

$0.00
In stock
1
Product Details

The 3D Potterbot Scara V4 is our largest model for 3D ceramic and paste printing with our extruder system.

4000ml Extruders will have a reduced maximum speed due to kinetic energy changes that can occur while 3D printing.

Please contact us to purchase this item. We only accept cash, check, or wire transfer for this item.

The Scara V4 is the first viable large-scale ceramic 3D printer using real clay. The advanced design and substantial construction can take on board loads like the 3D Potter 4000ml clay extruder.

What's included:

1. Scara v4

2. Closed loop stepper on X, Y, Z, extruder

3. Extruder size of your choice.

4. 5 anodized aluminum nozzles (standard sizes: 3, 4, 5, 6, and 8mm when extruder is purchased)

5. Parts Box: Alan key set, grease, Acme driver tool, tie wraps, extra screws

6. Power Supply

Specifications

Printing Envelope:
X/Y- 72" Diameter Circle (1829mm)
Z- 45” (1143mm)

Minimum Printing Envelope:
X/Y- 22" Diameter Circle (558mm)

Printer size:
W-34” L-18” H-44”
Normal operational space needed: W-40” L-36” H-~70”
Maximum operational space needed: W-88” L-88” H-~84”
Height to the top of the extruder fully extended is H~84” (2134mm)
Weight with extruder: 90 lbs. (41kg)

Average speed: 1.2’’ to 3.9’’/s (30 to 100 mm/s)
Power Supply: Output - 24V ~15 amps, Input - 110-220V, 50-60 Hertz.
Power consumption: 24V ~8 amps, ~192 Watt
Main controller board running Duet3D with Atmel SAM4E8E: 120MHz ARM Cortex-M4

Full control through web interface, no apps or software installation. Non-WiFi versions are available, please contact us if you would like this type of connection (Ethernet connection).

Save this product for later

 

 

About

Attention artists, hobbyists, schools, 3-D printers and small industrial foundries: SHELLSPEN furnishes all materials needed to do Lost-Wax Ceramic Shell Metal Casting. In addition to providing customized tech support, we also furnish a complete line of specialized materials, techniques and workshops on the processes.

Contact Us

Shellspen International Inc
PO Box 1741
Venice, FL 34284-1741

shellspentech@shellspen.com

Copyright © 2024 – Shellspen International Inc. All Rights Reserved.

Secured By miniOrange