Shellspen Int. Inc.
P.O. Box 1741
Venice, FL 34284-1741
USA
941-228-0001
shellspentech@shellspen.com
The 3D Potterbot Scara V4 is our largest model for 3D ceramic and paste printing with our extruder system.
4000ml Extruders will have a reduced maximum speed due to kinetic energy changes that can occur while 3D printing.
Please contact us to purchase this item. We only accept cash, check, or wire transfer for this item.
The Scara V4 is the first viable large-scale ceramic 3D printer using real clay. The advanced design and substantial construction can take on board loads like the 3D Potter 4000ml clay extruder.
1. Scara v4
2. Closed loop stepper on X, Y, Z, extruder
3. Extruder size of your choice.
4. 5 anodized aluminum nozzles (standard sizes: 3, 4, 5, 6, and 8mm when extruder is purchased)
5. Parts Box: Alan key set, grease, Acme driver tool, tie wraps, extra screws
6. Power Supply
Printing Envelope:
X/Y- 72" Diameter Circle (1829mm)
Z- 45” (1143mm)
Minimum Printing Envelope:
X/Y- 22" Diameter Circle (558mm)
Printer size:
W-34” L-18” H-44”
Normal operational space needed: W-40” L-36” H-~70”
Maximum operational space needed: W-88” L-88” H-~84”
Height to the top of the extruder fully extended is H~84” (2134mm)
Weight with extruder: 90 lbs. (41kg)
Average speed: 1.2’’ to 3.9’’/s (30 to 100 mm/s)
Power Supply: Output - 24V ~15 amps, Input - 110-220V, 50-60 Hertz.
Power consumption: 24V ~8 amps, ~192 Watt
Main controller board running Duet3D with Atmel SAM4E8E: 120MHz ARM Cortex-M4
Ceramic Shell in Suspension for lost-wax & lost-PLA metal casting. 3d Printers for Pottery & Concrete. Shellspen means "Shell" for ceramic shell, in "Spen" in suspension. Developed in the mid 1960's in Sarasota, Florida's first art foundry and sold Worldwide since 1979.
Shellspen Sean founded Shellspen Int. Inc. in 1979, after growing up bronze casting since 1974.
Shellspen Int. Inc.
P.O. Box 1741
Venice, FL 34284-1741
USA